Custom Gates & Gate Operator Specialist Serving California's Central Coast     805-462-8500


Home • Photo Gallery • Services • Gate Operators • Access Controls • Columns • Contact


Stone, Brick & Stucco Columns

Nothing seams to set off a Wrought Iron Gate more than a Rock or Brick Column with a custom Pre-Cast Column Cap. Masonry piers can be built in a variety of styles, stone selections and dimensions to complement any landscape. Working with our masonry craftsmen or yours brick or stone piers can enhance the entry gate design and add years of maintenance-free value to your project. Our integrated steel support post is cast in its concrete foundation to the correct height and driveway width, then the masonry pier is built up around post.

There shall be no anchors drilled into the finished masonry, as all hinge plates, positive stops, and gate operator attachment points are all welded to the support post. It is this kind of attention to detail that is evident throughout the design, fabrication and installation process that sets our entry gate systems apart from any other.

1. Hinge posts super-structure installed with gates into new concrete pier prior to erection of new masonry columns

2. Finished column erected after installation of super-structure with gates

3. Finish grade

4. Top of concrete pier 3" below finished grade

5. 48" (increase to 60" for 20' wide gates)

6. Top of concrete pier 26-28" for standard 24" square masonry column

  Here's a job during construction a finished
Entry Post Entry Post Gate Column In-Ground Motor Loops      

Day One Finished

Day One Finished


About Us • Driveway Gates • Commercial Gates • Fence • Project Guide • Clients List


Central Coast Gates
A Division of Electronic Gate Systems, Inc
CA Lic # 619877
Bonded Insured
Questions or problems regarding this web site should be directed to Electronic Gate Systems, Inc.
Copyright 2002 Electronic Gate Systems, Inc.. All rights reserved.
Last modified: 03/26/12.